Orange Pi PC 2

As linhas começadas por # são para correr como root e as $ como user.

Requisitos

Gentoo

# crossdev -t aarch64-unknown-linux-gnu --g 7.2.0 -v
# PYTHON=python2 emerge u-boot-tools

ArchLinux

# pacman -S uboot-tools aarch64-linux-gnu-binutils aarch64-linux-gnu-gcc aarch64-linux-gnu-glibc aarch64-linux-gnu-linux-api-headers

Limpar

Escrever zeros no inicio do cartão para ter a certeza que não tem restos de outro bootloader.

# dd if=/dev/zero of=/dev/sdX bs=1M count=8

Criar Partição

Criar a partição com o inicio a partir do sector 4096.

# fdisk /dev/sdX

Filesystem

Criar o filesystem com esta opção hacker que ripei de outro artigo.

# mkfs.ext4 -O ^metadata_csum /dev/sdX1

Copiar o Userland

# mkdir /mnt/opipc
# mount /dev/sdX1 /mnt/opipc
$ mkdir ~/opipc
$ cd ~/opipc

ArchLinux

$ wget http://archlinuxarm.org/os/ArchLinuxARM-aarch64-latest.tar.gz
$ bsdtar -xpf ArchLinuxARM-aarch64-latest.tar.gz -C /mnt/opipc

Gentoo

Sacar o mais recente de http://distfiles.gentoo.org/releases/arm/autobuilds/current-stage3-arm64/

$ wget http://distfiles.gentoo.org/releases/arm/autobuilds/current-stage3-arm64/stage3-arm64-????????.tar.bz2
$ tar xfa stage3-arm64-????????.tar.bz2 -C /mnt/opipc

boot.scr

Criar o ficheiro /mnt/opipc/boot/boot.cmd com o seguinte conteudo:

part uuid ${devtype} ${devnum}:${bootpart} uuid
setenv bootargs console=${console} root=PARTUUID=${uuid} rw rootwait
setenv fdtfile allwinner/sun50i-h5-orangepi-pc2.dtb

if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/Image; then
  if load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} /boot/dtbs/${fdtfile}; then
    if load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} /boot/initramfs-linux.img; then
      booti ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
    else
      booti ${kernel_addr_r} - ${fdt_addr_r};
    fi;
  fi;
fi

E correr o mkimage para criar o boot.scr.

$ cd /mnt/opipc/boot
$ mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Orange Pi PC 2 boot script" -d boot.cmd boot.scr

Sources

Sacar o source de tudo necessario para bootar, o Armbian é usado para ripar o config do kernel e os patches adicionais.

$ cd ~/opipc
$ git clone https://github.com/armbian/build.git armbian
$ git clone git://git.denx.de/u-boot.git -b v2017.07 u-boot
$ git clone https://github.com/apritzel/arm-trusted-firmware -b allwinner-stable arm-trusted-firmware-sunxi-main
$ git clone https://github.com/Icenowy/linux/ -b sunxi64-4.13.y linux-sun50i-dev

ARM Trusted Firmware

$ cd ~/opipc
$ cd arm-trusted-firmware-sunxi-main
$ make CROSS_COMPILE=aarch64-unknown-linux-gnu- PLAT=sun50iw1p1 DEBUG=1 bl31
$ cp build/sun50iw1p1/debug/bl31.bin ../u-boot/

U-Boot

$ cd ~/opipc
$ cd u-boot
$ make ARCH=arm CROSS_COMPILE=aarch64-unknown-linux-gnu- -j4 orangepi_pc2_defconfig
$ make ARCH=arm CROSS_COMPILE=aarch64-unknown-linux-gnu- -j4 
$ cat spl/sunxi-spl.bin u-boot.itb > u-boot-sunxi-with-spl.bin

E gravar o bootloader no cartão com:

# dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=8k seek=1

Kernel

$ cd ~/opipc
$ cd linux-sun50i-dev
$ cp ../armbian/config/kernel/linux-sun50i-dev.config .config

$ for i in ../armbian/patch/kernel/sun50i-dev/*.patch; do patch -p1 < $i; done
$ for i in ../armbian/patch/kernel/sun50i-dev/scpi/*.patch; do patch -p1 < $i; done

$ make ARCH=arm64 CROSS_COMPILE=aarch64-unknown-linux-gnu- -j4
$ make ARCH=arm64 CROSS_COMPILE=aarch64-unknown-linux-gnu- INSTALL_MOD_PATH=/mnt/opipc  -j4 modules_install
$ cp arch/arm64/boot/Image /mnt/opipc/boot
$ cp arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dtb /mnt/opipc/boot/dtbs/allwinner/sun50i-h5-orangepi-pc2.dtb

Finalizar

# sync
# umount /mnt/opipc
# eject /dev/sdX