Orange Pi One Plus

Fonte: WikiPeida
Saltar para a navegação Saltar para a pesquisa

Requisitos

Gentoo

# crossdev -P -v -t aarch64-unknown-linux-gnu
# PYTHON=python2 emerge u-boot-tools

ArchLinux

# pacman -S uboot-tools aarch64-linux-gnu-binutils aarch64-linux-gnu-gcc aarch64-linux-gnu-glibc aarch64-linux-gnu-linux-api-headers

Preparar o cartão

Limpar

Escrever zeros no inicio do cartão para ter a certeza que não tem restos de outro bootloader.

# dd if=/dev/zero of=/dev/sdX bs=1M count=8

Criar Partição

Criar a partição com o inicio a partir do sector 4096.

# fdisk /dev/sdX

Filesystem

Criar o filesystem com esta opção hacker que ripei de outro artigo.

# mkfs.ext4 -O ^metadata_csum /dev/sdX1
# mkswap /dev/sdX2

Copiar o Userland

# mkdir /mnt/opioneplus
# mount /dev/sdX1 /mnt/opioneplus
$ mkdir ~/opioneplus
$ cd ~/opioneplus

ArchLinux

$ wget http://archlinuxarm.org/os/ArchLinuxARM-aarch64-latest.tar.gz
$ bsdtar -xpf ArchLinuxARM-aarch64-latest.tar.gz -C /mnt/opioneplus

Gentoo

Sacar o mais recente de http://distfiles.gentoo.org/releases/arm/autobuilds/current-stage3-arm64/

$ wget http://distfiles.gentoo.org/releases/arm/autobuilds/current-stage3-arm64/stage3-arm64-????????.tar.bz2
$ tar xfa stage3-arm64-????????.tar.bz2 -C /mnt/opioneplus

fstab

Editar o /mnt/opioneplus/etc/fstab e usar o seguinte.

<file system>          <dir>   <type>  <options>               <dump>  <pass>
/dev/mmcblk0p1          /       ext4    defaults,noatime        0       1
/dev/mmcblk0p2          none    swap    defaults                0       0

boot.scr

Criar o ficheiro /mnt/opioneplus/boot/boot.cmd com o seguinte conteúdo:

part uuid ${devtype} ${devnum}:${bootpart} uuid
#setenv console tty0

setenv bootargs console=${console} root=PARTUUID=${uuid} rw rootwait
setenv fdtfile allwinner/sun50i-h6-orangepi-one-plus.dtb

if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/Image; then
  if load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} /boot/dtbs/${fdtfile}; then
    if load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} /boot/initramfs-linux.img; then
      booti ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
    else
      booti ${kernel_addr_r} - ${fdt_addr_r};
    fi;
  fi;
fi

# Generate with:
# mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Orange Pi One Plus boot script" -d boot.cmd boot.scr

E correr o mkimage para criar o boot.scr.

$ cd /mnt/opioneplus/boot
$ mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Orange Pi One Plus boot script" -d boot.cmd boot.scr

ARM Trusted Firmware

$ cd ~/opioneplus
$ git clone https://github.com/ARM-software/arm-trusted-firmware
$ cd arm-trusted-firmware
$ make CROSS_COMPILE=aarch64-unknown-linux-gnu- PLAT=sun50i_h6 DEBUG=1 bl31
$ cp build/sun50i_h6/debug/bl31.bin ../u-boot/

U-Boot

$ cd ~/opioneplus
$ git clone git://git.denx.de/u-boot.git
$ cd u-boot
$ export BL31=~/opioneplus/u-boot/bl31.bin
$ make ARCH=arm CROSS_COMPILE=aarch64-unknown-linux-gnu- -j4 orangepi_one_plus_defconfig
$ make ARCH=arm CROSS_COMPILE=aarch64-unknown-linux-gnu- -j4 

E gravar o bootloader no cartão com:

# dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=8k seek=1

Kernel

# menuconfig, se necessario
$ make ARCH=arm64 CROSS_COMPILE=aarch64-unknown-linux-gnu- menuconfig

# sem modulos
$ make ARCH=arm64 CROSS_COMPILE=aarch64-unknown-linux-gnu- Image dtbs -j4

# com modulos
$ make ARCH=arm64 CROSS_COMPILE=aarch64-unknown-linux-gnu- Image dtbs modules -j4

# instalar modulos
$ make ARCH=arm64 CROSS_COMPILE=aarch64-unknown-linux-gnu- INSTALL_MOD_PATH=/mnt/opioneplus modules_install -j4

$ cp arch/arm64/boot/Image /mnt/opioneplus/boot
$ cp arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb /mnt/opioneplus/boot/dtbs/allwinner

MALI

$ cd ~/opioneplus
$ git clone https://github.com/mripard/sunxi-mali.git
$ cd sunxi-mali
$ export ARCH=arm64
$ export CROSS_COMPILE=aarch64-unknown-linux-gnu-
$ export KDIR=/root/opioneplus/linux
$ export INSTALL_MOD_PATH=/mnt/opioneplus
$ ./build.sh -r r6p2 -b
$ ./build.sh -r r6p2 -i

$ cd ~/opicp2
$ git clone https://github.com/free-electrons/mali-blobs.git
$ cd mali-blobs
$ cp r6p2/arm64/fbdev/lib* /mnt/opioneplus/usr/lib/

Finalizar

# sync
# umount /mnt/opioneplus
# eject /dev/sdX

Ligações externas